金属前处理喷淋线起着清洁铝型材表面的污渍的作用，清洁的同时在型材表面形成一层铬化膜，为喷粉作好前期工作，喷淋线利用喷淋原理，使药液连续不断的作用于工件表面，工作 连续性强、效率高，适合大批量的作业要求，应用较为广泛，传统的前处理喷淋线在使用时，喷淋管定位不便且内部部件安装较为复杂，同时多组喷嘴对型材进行喷淋处理时，部分喷淋液集聚在喷淋腔内不便清理影，响了前处理喷淋线的使用。

　　The metal pre-treatment spray line plays a role in cleaning the stains on the surface of aluminum profiles. At the same time, a layer of chrome film is formed on the surface of the profile to prepare for powder spraying. The spray line uses the principle of spraying to continuously apply the liquid on the surface of the workpiece, with strong continuity and high efficiency, suitable for large-scale operation requirements. It is widely used. Traditional pre-treatment spray lines have inconvenient positioning of the spray pipe and complex installation of internal components. At the same time, when multiple sets of nozzles spray the profile, some of the spray liquid accumulates in the spray chamber, which is difficult to clean and affects the use of the pre-treatment spray line.

　　金属前处理喷淋线，包括外壳，所述外壳的下表面固定安装有底座，且外壳的两侧外壁底部位置均设置有固定架，两组所述固定架远离外壳的上表面均固定安装有若干组水泵，所述水泵的上表面固定连接有抽液管，且水泵的一侧和外壳的顶部位置之间固定安装有输液管，所 述外壳的两侧内壁位置分别设置有第一喷淋管和第二喷淋管，且第一喷淋管和第二喷淋管以 外壳为中心对称设置，所述外壳的顶部两侧位置分别开设有和第一喷淋管、第二喷淋管对应 匹配的连接槽，所述输液管的下端设置在连接槽的内部，所述第一喷淋管和第二喷淋管的上 端分别焊接在相对应所述输液管的下端，所述外壳的内壁顶部位置水平设置有吊轨和两组定位块，所述第一喷淋管、第二喷淋管和外壳之间均固定安装有三组卡环，三组所述卡环在竖直方向上平行分布，所述外壳的内壁底部中间位置设置有固定块，所述外壳的内壁底部前后 侧边缘位置均焊接有挡板，且外壳的内壁底部两侧边缘位置分别开设有第一集液槽和第二集 液槽，所述第一喷淋管和第二喷淋管分别设置在第一集液槽和第二集液槽的上方，位于前侧 边缘位置所述挡板的前表面底部两侧边缘均固定安装回收管。

　　A metal pre-treatment spray line, comprising an outer shell, wherein a base is fixedly installed on the lower surface of the outer shell, and fixed brackets are provided at the bottom positions of the outer walls on both sides of the outer shell. Two sets of fixed brackets are fixedly installed on the upper surfaces far from the outer shell, and several sets of water pumps are fixedly installed. The upper surface of the water pump is fixedly connected with a suction pipe, and an infusion pipe is fixedly installed between one side of the water pump and the top position of the outer shell. The first and second spray pipes are respectively installed on the inner walls of both sides of the outer shell, and the first and second spray pipes are symmetrically arranged around the outer shell. Connection grooves corresponding to the first and second spray pipes are respectively provided on both sides of the top of the outer shell. The lower end of the infusion pipe is set at Inside the connection slot, The upper ends of the first spray pipe and the second spray pipe are respectively welded to the lower end of the corresponding infusion pipe. The top position of the inner wall of the shell is horizontally provided with a suspension rail and two sets of positioning blocks. Three sets of snap rings are fixedly installed between the first spray pipe, the second spray pipe, and the shell, and the three sets of snap rings are distributed parallel in the vertical direction. A fixing block is set in the middle position of the bottom of the inner wall of the shell. The front and rear edges of the bottom of the inner wall of the shell are welded with baffles, and the first and second liquid collection tanks are respectively set on both sides of the bottom of the inner wall of the shell. The first and second spray pipes are respectively set in the first and second liquid collection tanks. Above the groove, recycling tubes are fixedly installed on both sides of the bottom edge of the front surface of the baffle located at the front edge position.

　　本文由 通过式喷淋清洗机   友情奉献.更多有关的知识请点击  http://www.jnthcsb.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the through type spray cleaning machine For more related knowledge, please click http://www.jnthcsb.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.