欢迎访问济南科尔超声波设备有限公司网站!
公司简介 | 联系我们 |微信扫一扫

专注生产工业用清洗设备

让工业清洗无难事

业务咨询电话:

18663767799

你所在位置: 首页 > 产品中心 > DPF再生设备
DPF再生设备

超声波清洗机设备价格

作者:guanli 来源:http://www.jnthcsb.com 时间:2020-08-27 11:10:13

循环过滤超声波清洗机(图1)

1.在使用全系列超声波清洗设备的时候需要将清洗液倒入清洗罐中,同时要注意需不需要给设备清洗罐进行加温。如果不用加温,则液位仪要超过内罐高宽比的1/3。如果需要加温,则清洗液需要超过内罐高宽比的3/4。

1. When using the whole series of ultrasonic cleaning equipment, it is necessary to pour the cleaning solution into the cleaning tank. At the same time, it is necessary to pay attention to whether it is necessary to heat the equipment cleaning tank. If there is no need for heating, the liquid level meter should exceed 1 / 3 of the height width ratio of the inner tank. If heating is needed, the cleaning fluid should be more than 3 / 4 of the height width ratio of the inner tank.

2.将全系列超声波清洗设备的电源线插头插进接地装置良好的单相电220伏和50hz交流电源插头。

2. Plug the power cord plug of the whole series of ultrasonic cleaning equipment into the single-phase 220 V and 50 Hz AC power plug with good grounding device.

3.按住全系列超声波清洗设备的“超声波”按键,指示灯照亮,器皿内的液体会震动并开始进行汽蚀。

3. Press and hold the "ultrasonic" button of the whole series of ultrasonic cleaning equipment, the indicator light will illuminate, and the liquid in the vessel will vibrate and start cavitation.

4.在清理工作结束后,需要及时将全系列超声波清洗设备的电源关闭,同时需要排出内部残留的污物以及清洗液。

4. After the cleaning work, it is necessary to turn off the power supply of the whole series of ultrasonic cleaning equipment in time, and discharge the internal residual dirt and cleaning fluid.