欢迎访问济南科尔超声波设备有限公司网站!
公司简介 | 联系我们 |微信扫一扫

专注生产工业用清洗设备

让工业清洗无难事

业务咨询电话:

18663767799

你所在位置: 首页 > 产品中心 > DPF再生设备
DPF再生设备

超声波清洗机生产厂家

作者:guanli 来源:http://www.jnthcsb.com 时间:2020-08-27 11:09:42

循环过滤超声波清洗机(图1)

1.循环过滤超声波清洗机里面不使用化学用品的洗衣液,而且每次更换新液的时候需要等清洗液更换好后才能启动开始工作。

1. Circulating filter the washing liquid without chemical products in the ultrasonic cleaning machine, and each time the washing liquid is replaced, it needs to wait until the washing liquid is replaced before starting to work.

2.要做好循环过滤超声波清洗机的电源安置工作,尤其是要做好电源接地线的接地工作。

2. Do a good job in the power placement of the circulating filter ultrasonic cleaning machine, especially in the grounding of the power supply grounding wire.

3.在使用循环过滤超声波清洗机的时候,要尽量避免重物挤压清洗机以及撞击超声波清洗机清洗缸的底部,避免设备的能量转换器晶片受损。

3. When using the circulating filter ultrasonic cleaning machine, try to avoid heavy objects squeezing the cleaning machine and hitting the bottom of the cleaning cylinder of the ultrasonic cleaning machine, so as to avoid damage to the energy converter chip of the equipment.

4.要定期清洗循环过滤超声波清洗机的清洗缸缸底,保证底部不会出现过多的杂物与污垢等。

4. Regularly clean the bottom of the cleaning cylinder of the circulating filter ultrasonic cleaning machine to ensure that there will not be too much debris and dirt at the bottom.

5.循环过滤超声波清洗机不能在没有清洗液的情况下使用,即清洗缸没有加一定数量的清洗液不能启动超声波开关。

5. The circulating filter ultrasonic cleaning machine cannot be used without cleaning solution, that is, the ultrasonic switch cannot be started without adding a certain amount of cleaning solution to the cleaning cylinder.

6.超声波清洗机的正常工作离不开稳定的电压,所以超声波发生器电源要单独使用220V/50Hz电源并配装2000W以上的稳压。

6. The normal operation of the ultrasonic cleaning machine is inseparable from the stable voltage, so the power supply of the ultrasonic generator should use the 220 V / 50 Hz power supply alone and be equipped with a voltage regulator of more than 2000 W.