欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯-通过式清洗机使用时存在异常的表现
新闻资讯

通过式清洗机使用时存在异常的表现

作者:guanli来源:http://www.jnthcsb.com/时间:2022-12-06

通过式清洗机使用时存在异常的表现是怎样的你知道吗?实际上多个方面都能体现出来,要赶紧解决才行、下面小编为您解释。
Do you know what the abnormal performance of the through type cleaner is? In fact, there are many aspects that can be reflected, and we need to solve them quickly. The following section explains for you.
在运行通过式清洗机的时候如果发现清洗的毛刷跳动或者发出异常的声音,那么这个时候可以去检查一下链条,一般出现这样情况的原因是链条松动了,或者是轴承损坏的原因。可以更换轴承和对链条进行张紧加固。
If it is found that the cleaning brush jumps or makes abnormal noise when running the through type cleaner, you can check the chain at this time. Generally, the reason for this is that the chain is loose or the bearing is damaged. The bearing can be replaced and the chain can be tensioned and reinforced.
传动轴转速忽快忽慢不稳定,发生的原因可能是调速表出现问题或者链条松了。可以找专门的技术人员来进行检查。
The speed of the transmission shaft is unstable, which may be caused by a problem with the speed regulator or a loose chain. You can find special technicians to check.
在加工清洗的玻璃发生偏移,这样的情况是压辊两头受力不够均匀了;解决的方式是及时的调整压辊平衡。
When the glass being processed and cleaned is shifted, the force on both ends of the pressure roller is not uniform enough; The solution is to adjust the pressure roll balance in time.
通过式清洗机
在加工中玻璃出现破碎的现象,这个时候要注意了一定要及时修正后再使用,一般发生的原因是毛刷的轴承破坏了,还有压辊压不住玻璃,需要及时调整和更换。
The glass is broken during processing. At this time, it must be corrected in time before use. Generally, the reason is that the brush bearing is damaged, and the glass cannot be pressed by the pressing roller. It needs to be adjusted and replaced in time.
清洗后的玻璃还是不干净,那么可能是喷水管坏了或者是堵了,毛刷的间距太大也会洗不干净。要及时清理和调整间距。
The glass after cleaning is still not clean, so it may be that the water spray pipe is broken or blocked, and the spacing between brushes is too large, which also makes it difficult to clean. Clean and adjust the spacing in time.
一但通过式清洗机使用时存在异常的表现,您就要及时找原因及时处理好,防止问题程度变大,更多相关内容就来关注我们www.jnthcsb.com了解吧!
Once there is abnormal performance in the use of the pass through washer, you should find out the reason in time and deal with it in a timely manner to prevent the problem from getting worse. Follow us at www.jnthcsb.com for more information!