欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题-碳氢清洗机清洗时的九个要点注意
常见问题

碳氢清洗机清洗时的九个要点注意

作者:guanli来源:http://www.jnthcsb.com/时间:2022-12-05

用户在使用碳氢清洗机中所遇到的各种问题,如:清洗不干净有残留、产品清洗刮花、产品氧化、发黄有白点等,碳氢清洗机小编整理了以下内容与大家分享,希望对使用碳氢清洗机的用户在清洗操作中有所帮助。
Users encounter various problems in the use of the hydrocarbon washer, such as residue, scratches, oxidation, yellowing and white spots, etc. The following contents are compiled for sharing with you, hoping to help users of the hydrocarbon washer in the cleaning operation.
1、容易重叠的产品,建议是少量清洗,再清洗时多抖动,让产品清洗更均匀。
1. For products that are easy to overlap, it is recommended to wash them in a small amount, and shake them more when washing again, so that the products can be cleaned more evenly.
2、清洗时间,根据清洗工件的结构、材质、油污及清洗方式的不同,所需的清洗时间也会有所差异。一般来说,油污较重零件的清洗时间可适当延长,油污较轻易于清洗的可缩短清洗时间,但是多单槽清洗不超过5分钟。
2. The cleaning time is different according to the structure, material, oil stain and cleaning method of the workpiece. Generally speaking, the cleaning time of parts with heavy oil stain can be appropriately extended, and the cleaning time of parts with light oil stain that are easy to clean can be shortened, but the cleaning time of multiple single tanks shall not exceed 5 minutes.
3、碳氢清洗溶剂有一定的饱和度,达饱和度后应及时更换新液。理论上1L碳氢清洗剂可溶解0.8L的油污。
3. The hydrocarbon cleaning solvent has a certain degree of saturation, and the new liquid shall be replaced in time after reaching the saturation. Theoretically, 1L hydrocarbon cleaning agent can dissolve 0.8L oil stain.
4、定期检碳氢清洗设备,避免设备故障影响清洗;注意清洗设备的功率调节,功率过大可能会打伤产品;风干设备调整干燥参数。
4. Check the hydrocarbon cleaning equipment regularly to avoid equipment failure affecting the cleaning; Pay attention to the power regulation of the cleaning equipment. Excessive power may damage the product; Air drying equipment adjusts drying parameters.
5、加强清洗作业车间的抽风及通风。
5. Strengthen the ventilation and ventilation of the cleaning workshop.
6、产品加工后及时清洗,避免人为污染,如:裸手接触。建议是佩戴手套、口罩作业,以防止作业人员的手汗或说话时有少量的口水溅到产品上,造成产品上有氧化点形成。
6. Clean the product in time after processing to avoid man-made pollution, such as bare hand contact. It is recommended to wear gloves and masks to work, so as to prevent operators from sweating their hands or splashing a small amount of saliva on the product when talking, which may cause the formation of oxidation points on the product.
7、秋冬季气温较低,超声波加温清洗时建议提高清洗温度,具体使用温度,由供货商提供相关参数。
7. The temperature in autumn and winter is low, so it is recommended to increase the cleaning temperature during ultrasonic heating cleaning. The supplier shall provide relevant parameters for specific use temperature.
碳氢清洗机
8、存储使用:应使用干净无污染的油抽取清洗剂,取液后及时封盖,避免挥发损耗。
8. Storage and use: clean and pollution-free oil shall be used to extract the cleaning agent, and the liquid shall be timely covered to avoid volatilization loss.
9、清洗剂损耗大:检查是不是清洗篮纱网密度小,带出液多, 通过更改清洗蓝以减少清洗蓝带出清洗剂的消耗;清洗后无沥干工序或是沥干时间短,也可能是清洗剂损耗大的原因之一。
9. Large detergent loss: check whether the density of the cleaning basket gauze is small and more liquid is carried out. Change the cleaning blue to reduce the consumption of detergent carried out by the cleaning blue; No drainage process or short drainage time after cleaning may also be one of the reasons for high detergent consumption.
随着国家对环保方面越来越重视,在可预见的未来,碳氢清洗机必将超越水基清洗机,成为工业清洗的主流品类。您有需求就来我们网站http://www.jnthcsb.com进行咨询了解吧!
As the country pays more and more attention to environmental protection, in the foreseeable future, hydrocarbon cleaning machines will surely surpass water-based cleaning machines and become the mainstream category of industrial cleaning. Come to our website if you need http://www.jnthcsb.com Consult and understand!