欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题-简答通过式喷淋清洗机的工艺流程
常见问题

简答通过式喷淋清洗机的工艺流程

作者:guanli来源:http://www.jnthcsb.com/时间:2022-11-29

通过式喷淋清洗机工作原理是通过高压水喷淋冲击工件表面并结合清洗剂的化学去污、除油、切水能力,从而使工件达到洁净的目的。下面来具体讲讲。
The working principle of the through type spray cleaning machine is to impact the surface of the workpiece by spraying high pressure water and combine the chemical decontamination, oil removal and water cutting capabilities of the cleaning agent to make the workpiece clean. Let's talk about it in detail.
1、自动输送链:传送不锈钢材质、链条传动,连续通过式前进,确保清洗篮框平稳、精确运行。
1. Automatic conveyor chain: It is used to transmit stainless steel materials, chain drive, and continuously pass forward to ensure the smooth and accurate operation of the cleaning basket frame.
2、喷淋系统:喷淋清洗共两套,一道采用药剂喷淋清洗,二道采用喷淋漂洗,三道采用喷淋漂洗、四道采用喷淋漂洗,五道采用喷淋防锈、内腔设喷管,喷管上设不锈钢喷嘴,上下喷淋管喷嘴间错布置,使清洗工件全方面在清洗区域确保工件清洗时无喷淋盲区,保证工件清洗的洁净度。
2. Spray system: there are two sets of spray cleaning, one is chemical spray cleaning, the other is spray rinsing, the third is spray rinsing, the fourth is spray rinsing, the fifth is spray rust prevention, the inner chamber is equipped with spray pipes, the spray pipes are equipped with stainless steel nozzles, and the nozzles of the upper and lower spray pipes are arranged in a staggered way, so that the workpiece can be cleaned in all aspects in the cleaning area to ensure that there is no spray blind area during workpiece cleaning, and to ensure the cleanliness of workpiece cleaning.
3、除油装置:由于前清洗工位的处理量较大,所以清洗液中的含油量较多,为了防止排水中含油量过大,此工位设有除油系统。
3. Oil removal device: because the treatment capacity of the front cleaning station is large, the oil content in the cleaning solution is large. To prevent excessive oil content in the drainage, the station is equipped with an oil removal system.
通过式喷淋清洗机
4、过滤循环系统:循环过滤槽内清洗剂,提高清洗效果。采用袋式过滤器。
4. Filtering and circulating system: circulating the cleaning agent in the filtering tank to improve the cleaning effect. Bag filter is used.
5、切水系统:切水腔内单独排放到总排水管中,在进料和出料外设有隔离段,防止水雾互窜;前后部设可拆式检修窗,以便于设备检修和清理。
5. Shearing water system: the shearing water chamber is separately discharged into the main drain pipe, and an isolation section is set outside the feeding and discharging to prevent water mist from channeling; Removable access windows are set at the front and rear to facilitate equipment maintenance and cleaning.
6、抽气系统:各个喷淋与风切段都在侧面开有抽气孔连接主管,主管前端配置有除雾塔内装拉西环,配备离心风机进行抽气。
6. Air extraction system: each spraying and air cutting section is equipped with an air extraction hole at the side to connect the main pipe. The front end of the main pipe is equipped with a Rasi ring inside the demister and a centrifugal fan for air extraction.
简答通过式喷淋清洗机的工艺流程这个内容就讲解完毕了,您有需求就来我们网站www.jnthcsb.com留言咨询或者直接联系,为您提供良好的服务!
Briefly answer the technological process of the through type spray washer. This is the end of the explanation. If you need, please come to our website www.jnthcsb.com to leave a message or contact us directly to provide you with good service!