欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯-喷淋清洗机部件之高压枪的使用
新闻资讯

喷淋清洗机部件之高压枪的使用

作者:guanli来源:http://www.jnthcsb.com/时间:2022-11-29

喷淋清洗机由喷嘴、喷头、高压枪、喷杆及连接接头等部件组成,喷淋清洗机的高压枪是清洗机的核心部件及使用的主要工具,下面来讲讲高压枪的使用原理吧。
The spray cleaning machine is composed of nozzle, nozzle, high-pressure gun, spray bar, connecting joint and other components. The high-pressure gun of the spray cleaning machine is the core component of the cleaning machine and the main tool used. Now let's talk about the principle of using the high-pressure gun.
高压枪是一种以触发式球阀为核心的简单机械,在水流的作用下,阀球保持在关闭位置或向前位置,或关闭水通过枪进入喷嘴的通道,当扳机被拉动时,它将活塞推到阀珠上,迫使阀珠离开阀座并打开。在水进入喷嘴的过程中,当释放触发器时,阀珠在弹簧的作用下回到阀座上,关闭通道。当参数允许时,高压枪应使操作人员感到舒适。
High pressure gun is a simple machine with trigger ball valve as the core. Under the action of water flow, the valve ball is kept in the closed position or the forward position, or the channel where water enters the nozzle through the gun is closed. When the trigger is pulled, it pushes the piston onto the valve ball, forcing the valve ball to leave the valve seat and open. In the process of water entering the nozzle, when the trigger is released, the valve ball returns to the valve seat under the action of the spring to close the channel. When the parameters allow, the high-pressure gun shall make the operator feel comfortable.
高压枪通过高压软管总成连接到高压泵的排放端。高压水枪是一种常见的执行机构,也是操作频繁的部件,根据排放压力的控制阀类型,可以进一步定义高压水枪:当阀门关闭时,如果高压水排放到大气中,则为溢流高压水枪;当阀门是关闭的,它是一个关闭高压枪。
The high-pressure gun is connected to the discharge end of the high-pressure pump through the high-pressure hose assembly. High pressure water gun is a common actuator and frequently operated component. According to the type of control valve for discharge pressure, it can be further defined as: when the valve is closed, if the high-pressure water is discharged into the atmosphere, it is an overflow high-pressure water gun; When the valve is closed, it is a closed high-pressure gun.
喷淋清洗机
此外要注意喷淋清洗机启动高压枪不出水如果自吸水,高压泵内有空气,反复开关高压枪待高压泵内空气排出即可出水,或者接通自来水待高压枪出水后换成自吸水启动设备。如果接自来水,有可能是长期放置后高压泵内高低压阀粘连,用空气压缩机由进水口向设备喷空气,待高压枪有气体喷出接上自来水,启动设备即可。
In addition, it should be noted that the spray washer starts the high-pressure gun without water. If there is air in the high-pressure pump due to self absorption, the high-pressure gun can be opened and closed repeatedly until the air in the high-pressure pump is discharged, or the tap water can be switched to the self absorption starting equipment after the high-pressure gun is discharged. If the tap water is connected, it may be that the high and low pressure valves in the high-pressure pump are stuck after being placed for a long time, and the air compressor is used to spray air to the equipment from the water inlet. After the high-pressure gun sprays gas, connect the tap water and start the equipment.
喷淋清洗机部件之高压枪的使用相关内容就讲解到这里了,您对此有什么不明白的地方或者说有需求随时可以来我们网站www.jnthcsb.com进行联系!
This is all about the use of the high-pressure gun of the spray washer components. If you have any questions or needs, you can contact us at www.jnthcsb.com at any time!