欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯-CNC高压清洗机安全操作十三点
新闻资讯

CNC高压清洗机安全操作十三点

作者:guanli来源:http://www.jnthcsb.com/时间:2022-11-03

CNC高压清洗机虽然说效率高效果高,对工作有很好的帮助,但不可以忘记的是该设备存在危险性,要做好安全正确的操作。下面来讲解十三点:
Although the CNC high-pressure cleaning machine is said to be highly efficient and effective, which is very helpful to the work, it should not be forgotten that the equipment is dangerous and should be operated safely and correctly. Now let's explain the thirteen points:
1.使用CNC高压清洗机前,须穿戴好防护用品(含护目镜)。
1. Before using the CNC high-pressure washer, wear protective equipment (including goggles).
2.严禁将清洗喷枪指向人、动物、电器设备。
2. It is forbidden to point the cleaning gun at people, animals and electrical equipment.
3.严禁使用CNC高压清洗机进行冲洗衣物、鞋、交通工具等与工作内容无关的操作。
3. It is forbidden to use CNC high-pressure washer to wash clothes, shoes, transportation tools and other operations unrelated to the work content.
4.CNC高压清洗机严禁离人使用,避免设备处于无人监控状态。
4. CNC high-pressure cleaning machine is strictly prohibited to be used without people to avoid the equipment being in an unattended state.
5.严禁将清洗喷枪指向有害物质,避免有害物质飞溅伤人。
5. It is strictly prohibited to point the cleaning spray gun at harmful substances to avoid injuries caused by splashing of harmful substances.
6.严禁在CNC高压清洗机工作时移动CNC高压清洗机,移动CNC高压清洗机时须在主电源断电后或控制面板主开关切换到“停”的位置后进行。
6. It is forbidden to move the CNC high-pressure washer when it is working. Moving the CNC high-pressure washer must be carried out after the main power supply is cut off or the main switch of the control panel is switched to the "stop" position.
7.使用CNC高压清洗机时须确保地面干燥、平坦,防止不正确的移动、CNC高压清洗机翻倒以及CNC高压清洗机漏电伤人,同时须确保旋转轮闸已被刹住。
7. When using the CNC high-pressure washer, ensure that the ground is dry and flat to prevent incorrect movement, overturning of the CNC high-pressure washer and electric leakage of the CNC high-pressure washer from injuring people, and ensure that the rotary wheel brake has been braked.
CNC高压清洗机
8.使用CNC高压清洗机时双手须紧握高压清洗枪,防止扣动清洗喷枪扣机和冲洗时,高压反冲力导致的清洗喷枪脱手或清洗喷枪失控等不安全情况的发生。
8. When using the CNC high-pressure cleaning machine, both hands must hold the high-pressure cleaning gun tightly to prevent unsafe situations such as the release of the cleaning gun or the out of control of the cleaning gun caused by the high-pressure recoil force when the cleaning gun is buckled and washed.
9.CNC高压清洗机停止使用时,控制面板主开关切须切换到“停”的位置并且断开主电源。
9. When the CNC high-pressure washer is stopped, the main switch of the control panel must be switched to the "stop" position and the main power supply must be disconnected.
10.CNC高压清洗机的清洁及维护工作须在CNC高压清洗机完全冷却,并且断开主电源后进行。
10. The cleaning and maintenance of the CNC high-pressure washer must be carried out after the CNC high-pressure washer is completely cooled and the main power supply is disconnected.
11.进行清洗时严禁用清洗喷枪上的安全锁定扭将清洗喷枪扣机锁定在打开位置。
11. During cleaning, it is strictly prohibited to lock the cleaning spray gun buckle in the open position with the safety locking knob on the cleaning spray gun.
12.当扣动清洗喷枪扣机无水喷出时,严禁人员凑近清洗喷枪进行处理。
12. When the cleaning gun is buckled and the machine is buckled, no one is allowed to approach the cleaning gun for treatment.
13.CNC高压清洗机压力设定或调整时须在释放清洗喷枪扣机后缓慢逐步进行。
13. The pressure setting or adjustment of CNC high-pressure washer must be carried out slowly and step by step after releasing the cleaning gun.
CNC高压清洗机安全操作就讲解到这里了,您对此有什么不了解的事儿就来我们网站www.jnthcsb.com咨询看看吧!
That's all for the safe operation of the CNC high-pressure washer. If you don't know anything about it, please come to our website www.jnthcsb.com for consultation!