欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯-低温废水回收设备发生磨损的处理方法
新闻资讯

低温废水回收设备发生磨损的处理方法

作者:guanli来源:http://www.jnthcsb.com/时间:2022-09-28

在使用低温废水回收设备的过程中难免会发生磨损的情况,如果磨损严重的话很有可能会对设备的使用年限有影响,那为什么设备会发生磨损呢?下面小编为您解答。
Wear is inevitable in the process of using low-temperature wastewater recovery equipment. If the wear is serious, it is likely to have an impact on the service life of the equipment. Why does the equipment wear? The following section will answer your question.
1、情况多是由于机器的连接处,连接或固定的过于紧密,滑润度不够,这个时候设备有可能发生损坏,所以我们需要定时检查分析设备磨损的原因,及时解决磨损问题,解决磨损的来源,避免磨损造成设备损坏影响使用。
1. In many cases, the connection or fixation of the machine is too tight, and the lubrication is not enough. At this time, the equipment may be damaged. Therefore, we need to regularly check and analyze the causes of equipment wear, solve the wear problem in time, and solve the source of wear, so as to avoid equipment damage caused by wear affecting the use.
2、情况是由于低温废水回收设备表面受到环境条件的影响,及一些雨水等液体的腐蚀,设备表面产生锈迹或者腐蚀情况发生的磨损,这种磨损虽然属于天灾不可避免,但我们可以定时检查设备,及时清理设备上的杂质,力求把磨损程度降低。
2. This is due to the impact of environmental conditions on the surface of the low-temperature wastewater recovery equipment, and the corrosion of some rainwater and other liquids, and the rust on the surface of the equipment or the wear caused by corrosion. Although this wear is inevitable due to natural disasters, we can regularly check the equipment and timely clean up the impurities on the equipment to reduce the wear.
3、磨损就是低温废水回收设备在使用过程中由于操作人员使用不当或方法错误造成的磨损,还有设备设计不合理也有可能发生磨损,这就需要业主熟练设备使用方法以及在购买设备时候进行运行调试,可防止此类磨损的发生。
3. Wear refers to the wear of low-temperature wastewater recovery equipment caused by improper use or wrong method by the operator during use, and the equipment may also be worn due to unreasonable design, which requires the owner to be proficient in the use of equipment and conduct operation commissioning when purchasing equipment to prevent such wear.
低温废水回收设备
维护以及保养:
Maintenance:
1.设备的维护人员在进行工作之前需要根据技术培训以及一些实践应用,在取得合格证之后才可以进入到岗位中进行工作,维护人员在使用设备之前需要了解它的处理工艺以及设备结构,设备操作方法以及专业技能指标等,需要掌握机电工程设备的维修方法;
1. Before working, the maintenance personnel of the equipment shall, according to the technical training and some practical applications, enter the post to work after obtaining the qualification certificate. Before using the equipment, the maintenance personnel shall understand its treatment process and equipment structure, equipment operation methods and professional skill indicators, and master the maintenance methods of electromechanical engineering equipment;
2.维护的人员应该按时去检查设备放置的建筑,设备以及电源等组件的应用情况,设备在运行的过程中不可以渗水,漏油以及漏气等现象发生,需要根据使用的时间添加润滑油或者是润滑剂。
2. The maintenance personnel should check the application of the buildings, equipment, power supply and other components where the equipment is placed on time. During the operation of the equipment, there should be no water seepage, oil leakage, air leakage and other phenomena, and lubricating oil or lubricant should be added according to the time of use.
3.在维护各种废水处理设备时,需要根据设备所规定的方法进行维修,具有油性物质的污染物不可以进入到设备中
3. During the maintenance of various wastewater treatment equipment, maintenance shall be carried out according to the methods specified by the equipment, and pollutants with oily substances shall not enter the equipment
5.低温废水回收设备处理需要日常的维护保养之外,还需要根据不同的使用时间对设备进行不同规模的修理。更多注意事项就来我们网站www.jnthcsb.com咨询吧!
5. The treatment of low-temperature wastewater recovery equipment requires not only routine maintenance, but also different scale repair according to different service time. For more information, please visit our website www.jnthcsb.com!