欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-新闻资讯-超声波清洗机配件合作的清洁原理
新闻资讯

超声波清洗机配件合作的清洁原理

作者:guanli来源:http://www.jnthcsb.com/时间:2022-07-31

超声波清洗机是通用的设备,应用方面也很广,下面小编就来给大家介绍一下超声波清洗机配件合作的清洁原理,想知道这方面知识的朋友,就一起往下面看看吧。
Ultrasonic cleaning machine is a general-purpose equipment, which is also widely used. Now let's introduce the cleaning principle of ultrasonic cleaning machine accessories cooperation. If you want to know this knowledge, let's take a look below.
全自动超声波清洗机使液体流动,产生数以百万计的微小气泡。这些气泡在超声波纵向传播的负压区形成并长大,在正压区迅速闭合。
Automatic ultrasonic cleaning machine makes the liquid flow, producing millions of tiny bubbles. These bubbles form and grow in the negative pressure zone of longitudinal ultrasonic propagation, and close rapidly in the positive pressure zone.
所谓“空腔”效应在这一过程中,封闭的气泡能形成1000多个大气压的瞬时高压,连续不断地产生闪光,像一系列小“爆炸”一样不断地冲击物体表面,使物体表面产生裂纹并迅速剥落污垢,从而达到物体表面清洁的目的。
The so-called "cavity" effect in this process, the closed bubble can form an instantaneous high pressure of more than 1000 atmospheres, continuously produce flash, and constantly impact the object surface like a series of small "explosions", causing cracks on the object surface and rapidly peeling off dirt, so as to achieve the purpose of cleaning the object surface.
全自动超声波清洗机
换能器与清洗液之间为不锈钢表面振动板清洗槽,超声波换能器粘附在其上,通过超声波在(电路板)上放置标牌产生一定频率和电压的交流电压信号,驱动换能器与不锈钢板进行高频振动。
Between the transducer and the cleaning fluid is the cleaning tank of the stainless steel surface vibrating plate, on which the ultrasonic transducer is adhered. Through the ultrasonic wave, a sign is placed on the (circuit board) to generate an AC voltage signal of a certain frequency and voltage, which drives the transducer and the stainless steel plate to vibrate at a high frequency.
当钢体振动时,把水往上推,当钢板振动向下时,水跟不上钢板的振动速度,所以水和钢板之间会形成缝隙,反复振动后会形成许多气泡。
When the steel body vibrates, push the water upward. When the steel plate vibrates downward, the water cannot keep up with the vibration speed of the steel plate, so a gap will be formed between the water and the steel plate, and many bubbles will be formed after repeated vibration.
这种气泡是由空化效应引起的,称为空化气泡。空泡沿振动方向向水中扩散。如果水中有工件,空腔气泡撞击工件表面,产生上千个大气压的冲击力,带动工件表面的污垢脱落。
This kind of bubble is caused by cavitation effect, which is called cavitation bubble. Cavitation diffuses into the water along the direction of vibration. If there is a workpiece in the water, the bubble in the cavity will hit the surface of the workpiece, producing an impact force of thousands of atmospheres, driving the dirt on the surface of the workpiece to fall off.
上面就是给大家介绍的超声波清洗机配件合作的清洁原理,大家看了上面的内容应该也有所了解了吧,希望上面介绍的知识对大家有所帮助,想了解更多内容可看一下我们网站www.jnthcsb.com其他信息。
The above is the cleaning principle of ultrasonic cleaning machine accessories cooperation introduced to you. After reading the above content, you should also understand it. I hope the knowledge introduced above will be helpful to you. For more information, please see other information on our website www.jnthcsb.com.