欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题-超声波清洗设备清洗技术在金属制品有哪些应用?
常见问题

超声波清洗设备清洗技术在金属制品有哪些应用?

作者:admin来源:http://www.jnthcsb.com/时间:2021-09-22

1、清洗质量高

1. High cleaning quality

98%的清洗效率是不同清洗方式中效率最高的,磷酸溶液超声波清洗主要作用机理是化学反应加超声剥离,其清洗液配方中缓蚀剂对磷酸于钢丝反应的抑制作用不但确保了良好的清洗效果,而且不会产生氢脆和过酸洗等清洗质量问题。

98% cleaning efficiency is the highest among different cleaning methods. The main mechanism of ultrasonic cleaning of phosphoric acid solution is chemical reaction and ultrasonic stripping. The inhibition of corrosion inhibitor on the reaction of phosphoric acid on steel wire in its cleaning solution formula not only ensures good cleaning effect, but also does not produce cleaning quality problems such as hydrogen embrittlement and over pickling.

2、高效节能

2. High efficiency and energy saving

磷酸溶液超声波清洗可同时除锈、脱脂,而且其清洗速度大大高于传统盐酸、硫酸清洗速度,因而清洗效率高。

Ultrasonic cleaning of phosphoric acid solution can remove rust and degrease at the same time, and its cleaning speed is much higher than that of traditional hydrochloric acid and sulfuric acid, so the cleaning efficiency is high.

1-210922143522D1.png

3、低污染

3. Low pollution

磷酸是一种中强酸,挥发性极低,因而磷酸溶液超声波清洗过程中没有传统酸洗方式伴随的严重酸气污染问题。目前清洗液中磷酸的回收利用率可达到85%以上,配置压滤机后理论上仅清洗后的冲洗废水需要处理(废清洗液再生,压滤后固体废物排出存放、液体复用),排放废水经CaO中和后可达国家二级以上污水排放标准,因而采用磷酸溶液超声波清洗污染量很低。

Phosphoric acid is a medium strong acid with very low volatility. Therefore, there is no serious acid gas pollution problem associated with the traditional pickling method in the ultrasonic cleaning of phosphoric acid solution. At present, the recovery and utilization rate of phosphoric acid in the cleaning solution can reach more than 85%. In theory, only the cleaning wastewater after cleaning needs to be treated after configuring the filter press (waste cleaning solution regeneration, solid waste discharge and storage after pressure filtration, liquid reuse). The discharged wastewater can reach the national sewage discharge standard above class II after Cao neutralization. Therefore, the pollution of ultrasonic cleaning with phosphoric acid solution is very low.

4、便于操作

4. Easy to operate

超声波清洗液中工业磷酸浓度由10%-20%变化时清洗效果基本相同,因而其工艺范围宽,便于现场操作管理。

When the concentration of industrial phosphoric acid in ultrasonic cleaning solution changes from 10% - 20%, the cleaning effect is basically the same, so its process range is wide and convenient for on-site operation and management.

5、综合成本低,环境效益好

5. Low comprehensive cost and good environmental benefits

使用磷酸溶液超声波清洗现场环境无酸气、不腐蚀厂房和设备,排放废气处理费用低,处理后等级高,不污染地表水和地下水。

Using phosphoric acid solution for ultrasonic cleaning of the site environment has no acid gas, no corrosion to plants and equipment, low treatment cost of discharged waste gas, high grade after treatment, and no pollution to surface water and groundwater.