欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题-通过式超声波清洗机的工作与其他设备有哪些不一样?
常见问题

通过式超声波清洗机的工作与其他设备有哪些不一样?

作者:admin来源:http://www.jnthcsb.com/时间:2021-07-26

随着超声波清洗机的应用越来越广泛,各种清洗设备都在不断改进和完善,正在取代市场上的旧设备。 清洗机采用的清洗技术为超声波清洗,频率为28kHz,由喷淋系统,喷嘴旋转装置,磷化系统组成。 该系统由自动温控加热系统,风刀,吹水系统组成。 对于一些特定的清洗对象,也有热风干燥,专用清洗架和清洗液过滤系统。

With the more and more extensive application of ultrasonic cleaning machine, all kinds of cleaning equipment are constantly improving and perfecting, and are replacing the old equipment in the market. The cleaning technology adopted by the cleaning machine is ultrasonic cleaning with a frequency of 28kHz, which is composed of spray system, nozzle rotating device and phosphating system. The system consists of automatic temperature control heating system, air knife and water blowing system. For some specific cleaning objects, there are also hot air drying, special cleaning rack and cleaning fluid filtration system.

清洗机工作时,将物料架放置在输送带上,工件安装在相应的物料架上。各部分不重叠,节奏为2-3分钟/篮子,篮子依次经过洁净室、冲洗室、干燥室和干燥室,完成洁净后的全过程,洁净备件,如需手工灌装水滴,干燥部放置。防尘翻转箱。

When the cleaning machine works, place the material rack on the conveyor belt and install the workpiece on the corresponding material rack. Each part does not overlap, and the rhythm is 2-3 minutes / basket. The basket passes through the clean room, flushing room, drying room and drying room in turn to complete the whole process after cleaning. Clean spare parts. If it is necessary to fill water droplets manually, place them in the drying department. Dustproof turnover box.

1-210H6112045648.jpg

与传统的清洗设备相比,该洗衣机的主要特点不能有效地防止对高光泽表面的损伤,而且也除去亚微米粒度附着在表面,甚至液体时,传感器的侧表面可以浸渍是C.倾斜,这样双方都可以进行清洗。

Compared with the traditional cleaning equipment, the main characteristics of the washing machine can not effectively prevent the damage to the high gloss surface, but also remove the submicron particle size attached to the surface, and even when the liquid is immersed, the side surface of the sensor can be c. inclined, so that both sides can be cleaned.

在通过清洗机进行操作时,要注意学生保持一个清洁工作部件在输送带上的定期,不要压在辊子上;在输送带上,清洗过的部件之间不能因为过度堆积,以防止清洗效果,并确保我们每个功能部件都能被清洗。

Do not press the parts on the conveyor belt during regular cleaning; On the conveyor belt, there shall be no excessive accumulation between the cleaned parts to prevent the cleaning effect and ensure that each of our functional parts can be cleaned.

洗衣机运行后,清洗后的部件不能被放置在传送带上,停止按钮停止机器,清洗液定期加入水和金属清洗剂的量,以补偿消耗。电平被保持在一定的高度。如果清洁效果通过常规技术要求实现,该洗涤液应更换。

After the washing machine runs, the cleaned parts cannot be placed on the conveyor belt, the stop button stops the machine, and the amount of water and metal cleaning agent are regularly added to the cleaning fluid to compensate for consumption. The level is maintained at a certain height. If the cleaning effect is achieved by conventional technical requirements, the washing solution shall be replaced.

以上就是今天小编带给大家的精彩内容,超声波清洗设备将不断深化自身的实力,不断的提高质量,做好价格公正,欢迎大家在网站上点击购买:http://www.jnthcsb.com

The above is the wonderful content brought to you by Xiaobian today. The ultrasonic cleaning equipment will continue to deepen its strength, continuously improve its quality and do a good job in price justice. Welcome to click to buy on the website: http://www.jnthcsb.com