欢迎访问济南科尔超声波设备有限公司网站!

专注生产工业用清洗设备

让工业清洗无难事

电话

业务咨询电话:

18663767799

你所在位置: 首页-新闻动态-常见问题-超声波清洗机的清洗效果与什么因素有关?
常见问题

超声波清洗机的清洗效果与什么因素有关?

作者:admin来源:http://www.jnthcsb.com/时间:2021-07-20

一、功率

1、 Power

产品容量与超声波清洗器功率直接相关(超声波功率为0.3-0.5W/cm2),大功率产品主要用于清洁硬件、机械和其他行业的一般物体或重污染(超声波功率为0.5-1W/cm2)。

The capacity of the product is directly related to the power of the ultrasonic cleaner (the ultrasonic power is 0.3-0.5w/cm2). High power products are mainly used to clean general objects or heavy pollution in hardware, machinery and other industries (the ultrasonic power is 0.5-1w / cm2).

二、时间

2、 Time

不同的超声波清洗器所清洗的时间也不相同,所以要把控好时间,尽量控制在10-20min以内,时间太短效果不好,时间太长容易使设备表面出现问题,影响光洁度。

The cleaning time of different ultrasonic cleaners is also different, so we should control the cleaning time well and try to control it within 10-20min. If the cleaning time is too short, the effect is not good. If the cleaning time is too long, it is easy to cause problems on the surface of the equipment and affect the finish.

2-210105134J0Q4.jpeg

三、温度

3、 Temperature

由于每个设备的物理特性不同,应选择不同的清洗温度,如一般清洗油脂50°c 以上是合适的;铝合金,一般选择40°c左右是合适的,温度过高,会形成氧化斑点; 毛刺一般选择15°c 以下独特的恒温技术,保证清洗对象在恒温环境下工作不受损害(我们的恒温产品恒温为0-80°c,± 2°c)。

Due to the different physical characteristics of each equipment, different cleaning temperature should be selected. For example, it is appropriate to clean grease above 50 ° C; Generally, 40 ° C is suitable for aluminum alloy. If the temperature is too high, oxidation spots will be formed; Burr generally selects the unique constant temperature technology below 15 ° C to ensure that the cleaning object will not be damaged in the constant temperature environment (our constant temperature product is 0-80 ° C, ± 2 ° C).

四、频率

4、 Frequency

针对不同的设备需要调清洗器的频率,不能所有的设备都按照一个频率来,像一些机械设备表面较硬的,频率能够高一点,但是对于一些电子产品或是塑料等产品,清洗器的频率再那么高的话会使这些产品出现质量问题。

It is necessary to adjust the frequency of the washer for different equipment. Not all the equipment can be operated at the same frequency. For example, the frequency of some mechanical equipment with hard surface can be higher. However, for some electronic products or plastic products, if the frequency of the washer is so high, these products will have quality problems.