1. Heating control panel of CNC machine tool
CNC machine tool cleaning machine used in ordinary laboratory, ultrasonic cleaning machine manufacturer contains heating function model, that is, CNC machine tool heating by function key. CNC machine area shows the current temperature, can set the temperature value, when the heating value is fully automatic stop heating. This kind of heating is usually made of epoxy resin board.
2. Temperature controller heating
The operation method is as follows: press and hold the heating power switch, the temperature controller will indicate the measured temperature and the operating temperature. When the measured temperature is less than the operating temperature, the out light on the temperature controller is on, the heating display light is on, and the machine is in the heating condition; When the measured temperature is higher than the operating temperature, the out light on the temperature controller is off, the heating display light is off, and the heating of the machine and equipment is terminated. Operating temperature setting mode: press the dial key to set the operating temperature, and the operating temperature is 58 degrees. This kind of heating pipe is generally used for heating.
3. Temperature control of mechanical equipment
Ordinary desktop cleaning machine generally adopts the temperature control of mechanical equipment, that is, the knob to adjust the temperature. For example, kq-250e desktop cleaning machine, its temperature control range is - 80 ℃ under normal temperature.
Today's wonderful content of ultrasonic cleaning equipment will be shared with you. For more wonderful content, please click our website http://www.jnthcsb.com Leave a message, or call directly, we will have special staff to serve you